MENA-Water is an engineering and manufacturing company that provides innovative solutions and services in the fields of water and wastewater treatment. Our challenge is to provide equipment and engineered solutions that are highly suitable for the environment and as per the actual demand.

Our turn-key tailor made solutions are providing the best technical package at the lowest capital and running cost. MENA-Water serves clients worldwide through the main offices in UAE and Germany, as well through satellite offices, partners and branch offices across the globe. Read more

This is the preliminary process of wastewater treatment that utilizes screens and other separation methods for removal of floating objects, such as rags, cans, bottles, sticks and grit that may clog pumps, small pipes, and downstream processes. The Purpose of the pre-treatment is to remove most of the non-soluble solids physically in order to reduce the pollutant loads and to protect all the subsequent steps in the treatment plant. Read more

The Wastewater flows through bars made from stainless steel, while contaminants are held back. The cleaning elements are fixed between two chains, through this design the screenings can be discharged into containers, screw compactors, screw conveyors, conveyor belts etc. Read more

The Wastewater flows through a grid rack of steel or stainless steel which retains contamination products. Screenings are pushed into a container, screening Prew, screw Container, belt conveyor etc. Via a pivoting stripper, The screen can be mounted vertically in flymes and can be arranged as a forward flow or reverse flow unit. Read more

The wastewater flows through a grating screen made of stainless steel, while screenings are held back. Solid matters is picked up by special grab directly at the bottom of the channel without the need for a base step .A pivoting scraper discharges the screenings into a container, wash compactor, screw conveyor, conveyor belt etc. Read more

The wastewater flows through perforated filter elements made of stainless steel The filter elements forms a continuous filter belt which is cleaned by a brush at the upper deflection point. The cleaning process is assist by series of jets working in proportion to the screening loads.
Tines located on every 5th screening element prevent build-up of rolling matter in front of the screen and ensure that large matter is removed. The sheet steel side plates of the filter elements slide on plastic rails on the screen frame, thus forming a seal and preventing screenings from being washed past the screen at the sides. Read more

The screening grid consists of a fixed step grid rack and a moving step grid rack (shifting grid). The extender is connected to the two crank-shafts of the drive via two connecting rods. The screening being conveyed directly to the wash compactor or to conveyor. Read more

Combined machine with integrated screenings press for mechanical treatment of municipal and industrial wastewater, Rotating brushes which are mounted on the front of the flights, clean the screening area. Solids are retained. Read more

This is a screen screw compactor for vertical installation. It separates solids from liquid and lifts the screenings to a higher discharge point. It is most suitable for screening in pumping stations and manholes. Read more

For Screening of Sewage in pump stations and manholes. It is based on the design of coarse bar screens. The basket screen is raised and lowered in the shaft via electric hoist. It is guided by two guide rails built into the shaft and four plastic rollers fitted to the basket. The screen is manually controlled via a local control section with dead man’s switch for raising and lowering the basket. Read more

The wastewater flows through a perforated filter elements made of stainless steel, whilst contaminants are held back. The filter elements form a continuous filter belt, which is cleaned by a brush at the upper deflection point. Read more

Washing compactor is used to dewater, compact and convey screenings or other damp/wet waste materials. Waste materials from the screening unit, screw conveyor or conveyor belt are dropped into the filling hopper. The worm screw conveys, dewaters and compacts the waste material. Read more

Screw conveyors are used to convey solid matter (Screening, Grit and Dewatered Sludge). The conveyor screw can be constructed with or without a shaft. The screw conveyor can be directly installed in a concrete tank or a stainless steel tank. The conveyed material is then carried to the discharge point like a Skip, Compactor or a classifier. Read more

The Grit Process separates the grit from raw sewage by vortex effect and the separated grit transport to grit classifier or grit washer by using air lift pump or grit pump. Read more

Energy supply is basic for all water treatment. Many industries are spending a lot of money for disposal of their waste products. During treatment of high organic polluted wastewater the load can be used by creating energy with producing biogas for driving gas motors to gain electrical and heat energy.

For non-polluting supply and operation at far away regions, not connected to electric network, the use of photovoltaic systems or wind energy is very suitable for independent energy supply. Read more

Inflow of grit/water mixture can be either under pressure or by gravity line. The tangential feed induces a rotary movement in the water which causes the heavier substances such as sand to sink to the apex of the funnel where they are removed and dewatered by the screw conveyor. Read more

The grit/water mixture is fed in by the inlet flange of the grit wash tank. Organic matters are held in suspension and floated off while the grit is sediment in the container. With the addition of water, the sediment grit is separated from the remaining organic constituents using a stirring device and up-current technique. The grit is removed from the container, de-watered and discharged via discharge screw. Read more

Complete mechanical pre-treatment in a compact plant includes: Fine screen, Screening treatment, Grit traps, Grease traps and grit classifiers. As the wastewater passes the screen, solid materials are removed and wastewater flows into the grit trap. This prevents sedimentation between the screen and the grit trap. The waste water is pumped or flows freely into the flume of the screen, where it is cleaned and the screenings discharged, de-watered and compacted. Read more

The Micro Filter Screen can relieve primary treatment burden Ideal for municipal and industrial wastewater treatment plants in a very small footprint, saving major infrastructure, investment and space. Screenings dewatering and odor containment are integrated parts of the machine. Read more

For further information contact: Mr. Khatib Khan, Mob: +971-55-2314089,
Product Manager, Skype ID: Khatib.mena.ae . Email: khatib@mena-water.com.

Follow us: